| 最大射程: | 200A~900A | 保管温度: | -40 - 125 |
|---|---|---|---|
| 出力電圧（線形）: | Vout= （Uc/5）·（V0+G·Ip） | ゼロ出力: | 2.5 |
| 消費電流: | 13 | 負荷抵抗: | 10 |
| 負荷キャパシタンス: | 1 | 電気ゼロ オフセット: | ±2.5 |
| ハイライト: | 900A Current Transducers,3us Response Current Transducers |
||
product manual
NACA XXXL-S6/SP5VA series current sensor is suitable for accurate measurement of AC, DC and pulse current isolation. The primary side and the secondary side are completely insulated during measurement.
| Performance requirements | ||||||
| parameter name | symbol | unit | parameter | condition | ||
| Minimum | Typical value | Max | ||||
| Electrical parameters | ||||||
| Maximum range | IP | A | 200A~900A | For more details, please contact CRRC | ||
| Storage temperature | TS | °C | -40 | 125 | ||
| voltage | UC | V | 4.75 | 5 | 5.25 | |
| Output voltage (linear) | Vout | V | Vout=(Uc/5)·(V0+G·Ip) | @UC | ||
| Sensitivity | G | mV/A | 2000/Ip | @UC=5V | ||
| Zero output | VO | V | 2.5 | @UC=5V | ||
| Current consumption | IC | mA | 13 | 15 | @UC=5V, No load on Vout | |
| Load Resistance | RL | KΩ | 10 | |||
| Load capacitance | CL | nF | 1 | 10 | ||
| Output internal resistance | ROUT | Ω | 1 | DC | ||
| Performance parameter | ||||||
| Zero output error | X0 | % | ±0.65 | @TA=25℃, UC=5V | ||
| ±0.9 | @-40℃<TA<125℃, UC=5V | |||||
| Sensitivity error | % | ±2.25 | @TA=25℃, UC=5V, 200A≤Ip≤800A | |||
| ±2.5 | @TA=25℃, UC=5V, Ip = 900A | |||||
| ±3.25 | @-40℃<TA<125℃, UC=5V,200A≤Ip≤800A | |||||
| ±3.75 | @-40℃<TA<125℃, UC=5V, Ip = 900A | |||||
| Electrical zero offset | FLY | mV | ±2.5 | |||
| Magnetic zero offset | FROM | mV | ±3 | |||
| Proportional error | .R | % | 0.5 | |||
| Linearity error | εL | % | -1 | 1 | of full range | |
| Response time | tr | μs | 3 | |||
| bandwidth | BW | kHz | 40 | @ -3dB | ||
| Phase difference | ∆φ | ° | -4 | @DC to 1kHz | ||
| Dimensions |
| Series size |
 |
| Mechanical parameters | Remarks |
| ● Plastic case PA 66 GF 25 ● Magnetic core FeSi wound core ● Mass 50g |
● ● VOUT>VO when IP flows in the positive direction (see arrow on drawing) |
| Electrical Interface | |
|
|
Procurement information
1. Products can be customized according to your needs. You are welcome to provide physical samples or detailed process drawings to design, produce and process.
2. If there is no special requirement, our company will assign logistics distribution and deliver the goods to customer factory
3. Payment method: delivery after payment, which can be negotiated according to the specific order quantity.
4. The response time of the number of customers should not exceed 8 working hours.
5. Emergency on-site service time shall not exceed 24 hours.
6. Provide emergency support for customer's urgent shortage of spare parts.
コンタクトパーソン: Miss. Elaine
電話番号: +86 18150151931
ファックス: 86-592-2611505
